This page uses cookies. By viewing our website, you are consenting to the use of cookies.
For further information concerning the use of cookies on this website, please click on “Further information”.

 

Idro 2k

Two component waterborne finish
Two component polyurethane waterborne finish. In the “natural wood effect” version, IDRO 2K confers a natural appearance to floors together with a uniformity and cleanliness that can only be compared to the results achieved with impregnation cycles with oil and/or wax.

Two component polyurethane waterborne finish. In the “natural wood effect” version, IDRO 2K confers a natural appearance to floors together with a uniformity and cleanliness that can only be compared to the results achieved with impregnation cycles with oil and/or wax. Apart from these features regarding appearance, IDRO 2K combines qualities of resistance to abrasion and to rubber marks never before achieved
by waterborne products so it is even recommended for use on heavy duty flooring (in salons, shops, etc.).
If it is applied directly without a sealer, it brightens up the colour of the wood quite considerably, without leading to yellowing over time.

TECHNICAL DATA SHEET
CERTIFICATION EC1
FLYER

Ezy

Two component waterborne fnish for wood foors
Ezy Finitura bicomponente all’acqua

Polyurethane water based fnish for treating wood foors. Thanks to the DCS (Dual Curing System) technology, EZY can cross-link both as a single component pro- duct and, after the addition of its hardener, as a two-component product. Thanks to this particular “double cross-linking”, EZY is outstanding for its speed of drying when used as a single component product directly on wood (ideal for extremely fast cycles) and, when used as a two-component product, it features high re- sistance to abrasion, to rubber marks and to chemical products, making it an excellent product for treating environments subject to heavy trafc (salons, shops, etc.). Furthermore, EZY is also outstanding for the ease with which the 2 components are mixed simply by adding component B to the container of component A and stirring without any particular mixing procedures. Avai- lable in 10, 30 and 60 gloss, it maintains the natural look of the wood thanks to its high level transparency, guaranteeing an excellent coverage and flling capacity, even when only two coats are applied (frst coat single component, second coat two component). The superb fow of the flm, even when applied thickly, complete the characteristics of a product which is unique in its kind. It guarantees an excellent fnal look even under the most extreme environmental conditions.

TECHNICAL DATA SHEET
FLYER

Velvet

Single component waterborne “soft to the touch” treatment
Single component polyurethane waterborne finishing treatment with S-XL technology, formulated with renewable raw materials. Floors treated with VELVET have a completely natural appearance and a unique, velvety feel to the touch.

Single component polyurethane waterborne finishing treatment with S-XL technology, formulated with renewable raw materials. Floors treated with VELVET have a completely natural appearance and a unique, velvety feel to the touch. Thanks to the high solid content and the extraordinary drying speed, the product allows very fast work cycles to be carried out (1-2 hours according to environmental conditions). Another very important feature is the ease with which the floors can be touched up if the surface is damaged or in the event of localized defects: in fact, work can be carried out just on those areas by marking them off with tape, sanding them and then reapplying the product. When the surface is dry, there are no signs of marks or imperfections. For rooms subject to heavy traffic, we recommend adding 10% VELVET IMPROVER to the last coat.

TECHNICAL DATA SHEET
CERTIFICATION EC1

Aqua Tenax

Two component waterborne sealer
Two component waterborne sealer featuring a high level insulating capacity, excellent coverage, good sandability and ease of application. The most important feature of this sealer is that it minimizes problems of overlapping


Two component waterborne sealer featuring a high level insulating capacity, excellent coverage, good sandability and ease of application. The most important feature of this sealer is that it minimizes problems of overlapping. AQUA TENAX has been formulated to give a pleasant shade to the wood without causing unwanted changes to the colour of those woods rich in tannin and other water soluble staining substances (oak, teak…). For this reason, it is recommended especially for difficult woods such as IPE LAPACHO when browning or reddening would be undesirable. Thanks to its high level of solid content, AQUA TENAX can be used in combination with the two component finishes in the INNOVATION range, to carry out two coat finishing cycles.

TECHNICAL DATA SHEET
CERTIFICATION EC1
 

Aqua First AD

Single component waterborne sealer
Aqua First AD

Single component high solid waterborne sealer featuring an excellent filling capacity, fast drying time and good shading of the wood

TECHNICAL DATA SHEET

Silk

Single component waterborne finish
Single component polyurethane waterborne finish featuring exceptional resistance to abrasion and to scuff marks which makes it ideal for use in every situation.

Single component polyurethane waterborne finish featuring exceptional resistance to abrasion and to scuff marks which makes it ideal for use in every situation. From the point of view of appearance, it differs from traditional waterborne products due to its considerable transparency, for the cleanliness of the film and above all for the warm tone that it confers on the wood, avoiding the “whitening” typical of other waterborne finishes.

TECHNICAL DATA SHEET
CERTIFICATION EC1
FLYER

Aqua Play 1

Single component waterborne finish
Single component waterborne finish featuring considerable ease of application and an excellent flow resulting in floors with an impeccable appearance.

Single component waterborne finish featuring considerable ease of application and an excellent flow resulting
in floors with an impeccable appearance. Thanks to the S-XL technology, AQUAPLAY 1 has a good resistance to abrasion, scratching, scuff marks as well as a chemical resistance equal to two component systems. If it is also used as a sealer, it confers a particularly warm tone to the wood.

TECHNICAL DATA SHEET

Up-Grade

Shader for waterborne systems
up-grade

Vermeister UP-GRADE is a special pre-dosed shader that can be added to any Vermeister waterborne products, sealer or top coat, single or two component, to lighten or darken the original color of the wood, eliminating unpleasant colour changes. Especially for oak and, in general, for all light coloured woods, UP-GRADE in its white version tends to neutralise yellowing and excess shading due to water soluble extractives naturally present in the wood. Each coat increases the toning effect and it is advisable to carry out a preliminary test to verify the final look. Available in the following shades: WHITE, GREY, BLACK, AMBER.

TECHNICAL DATA SHEET
FLYER